Spiral RGB LED Whip Lights Rocker with Spring Base Wireless Remote & App Control Antenna Whips Safety Dream-Color Dancing Chase Turn Signal & Brake Lights for Can-Am ATV UTV RZR Polaris Dune Buggy Offroad SXS SUV Side by Side Dune Buggy Trucks
Essential Details
。Color:colorful
。Vehicle Service Type: ATV, Polaris, Jeep, UTV, Can-am,, Truck, RZR
。Voltage: 12 Volts (DC)
。Light Source Type: LED
。Cover Included: 1 X 2 way splitter plug-and-play harness, 2 X Dust Cover, 1 X User Manua, 1 X RF Remote Controller, 1 X Lighted Whip Rocker Switch with jump wires, 2 X 3FT Spiral Lighted Whips, 2 X Flags1 X 2 way splitter plug-and-play harness, 2 X Dust Cover, 1 X User Manua, 1 X RF Remote Controller, 1 X Lighted Whip Rocker Switch with jump wires, 2 X 3FT Spiral Lighted Whips, 2 X Flags
。Fit Type: Universal Fit
。Warranty: 1 Year
。Special Feature: Premium Built To Last, Cool Design with 200% Brightness, One-to-one Remote Control, Simple Installation, Better Battery ProtectionPremium Built To Last, Cool Design with 200% Brightness, One-to-one Remote Control, Simple Installation, Better Battery Protection
。Material Stainless Steel, Polycarbonate
。Specifications:
。Tube Size: 3ft from tube to base
。Wire Length: 8.6 Feet
。LED Type: 5050 RGB
。LED Lumen: 20-22LM
。Lighting Patterns: 366 dancing patterns(chasing, build-up, strobe, pulse, scan, stack and more), 12 solid colors.
。Material: Flexible Polycarbonate tube, 180°bendable
。Base: Quick connect and release aluminum spring base
。Operating Voltage: 12V DC
。Operating Temperature: -20℃ to 45℃
。Waterproof rate: IP67
。Lifespan: Over 50,000 Hours
。Cool Design with 200% Brightness: Spiral design to glow in 360°direction, light up the night with hundreds of dancing patterns like chase, build-up, strobe, pulse, scan, stack etc and 12 solid colors. 200% Super brighter, Always ensure stand out in the ride, and safe in the night trail without being left out
。Premium Built To Last: Using flexible Polycarbonate tube, add proper flexibility for to prevent break or snapping at the base but will not overbounce to hit your cab. The quick-connect/disconnect base is upgraded to a fix one to lock the whip light to prevent it spinning around. The 3 Pin plug-and-play connector is upgraded in premium built and all hardware are upgraded in stainless steel. IP67 waterproof, sandproof, and shockproof. Durable to last
。One-to-one Remote Control: You can freely set into/remove one-to-one remote control mode. Hassle from others' remote control interference if you don’t like, and can easily pair with others when you remove the one-to-one remote control mode. (Note: See guidelines & tips on the user manual)
。Better Battery Protection: Provide whip light rocker switch for your use. You can connect whip light to rocker switch first instead to battery directly, avoid draining battery. (Note:See guidelines of rocker switch connection on the user manual)
。Simple Installation: Just quick release the base, mount it on a 12mm hole, and then quick connect the base with whip light. For wiring, just plug and play the whip lights with the 2 way splitter, and then connect it to rocker switch and battery. You may need extra wire in this part. (See guidelines of rocker switch connection on the user manual)
Essential Details
。Color:colorful
。Vehicle Service Type: ATV, Polaris, Jeep, UTV, Can-am,, Truck, RZR
。Voltage: 12 Volts (DC)
。Light Source Type: LED
。Cover Included: 1 X 2 way splitter plug-and-play harness, 2 X Dust Cover, 1 X User Manua, 1 X RF Remote Controller, 1 X Lighted Whip Rocker Switch with jump wires, 2 X 3FT Spiral Lighted Whips, 2 X Flags1 X 2 way splitter plug-and-play harness, 2 X Dust Cover, 1 X User Manua, 1 X RF Remote Controller, 1 X Lighted Whip Rocker Switch with jump wires, 2 X 3FT Spiral Lighted Whips, 2 X Flags
。Fit Type: Universal Fit
。Warranty: 1 Year
。Special Feature: Premium Built To Last, Cool Design with 200% Brightness, One-to-one Remote Control, Simple Installation, Better Battery ProtectionPremium Built To Last, Cool Design with 200% Brightness, One-to-one Remote Control, Simple Installation, Better Battery Protection
。Material Stainless Steel, Polycarbonate
。Specifications:
。Tube Size: 3ft from tube to base
。Wire Length: 8.6 Feet
。LED Type: 5050 RGB
。LED Lumen: 20-22LM
。Lighting Patterns: 366 dancing patterns(chasing, build-up, strobe, pulse, scan, stack and more), 12 solid colors.
。Material: Flexible Polycarbonate tube, 180°bendable
。Base: Quick connect and release aluminum spring base
。Operating Voltage: 12V DC
。Operating Temperature: -20℃ to 45℃
。Waterproof rate: IP67
。Lifespan: Over 50,000 Hours
。Cool Design with 200% Brightness: Spiral design to glow in 360°direction, light up the night with hundreds of dancing patterns like chase, build-up, strobe, pulse, scan, stack etc and 12 solid colors. 200% Super brighter, Always ensure stand out in the ride, and safe in the night trail without being left out
。Premium Built To Last: Using flexible Polycarbonate tube, add proper flexibility for to prevent break or snapping at the base but will not overbounce to hit your cab. The quick-connect/disconnect base is upgraded to a fix one to lock the whip light to prevent it spinning around. The 3 Pin plug-and-play connector is upgraded in premium built and all hardware are upgraded in stainless steel. IP67 waterproof, sandproof, and shockproof. Durable to last
。One-to-one Remote Control: You can freely set into/remove one-to-one remote control mode. Hassle from others' remote control interference if you don’t like, and can easily pair with others when you remove the one-to-one remote control mode. (Note: See guidelines & tips on the user manual)
。Better Battery Protection: Provide whip light rocker switch for your use. You can connect whip light to rocker switch first instead to battery directly, avoid draining battery. (Note:See guidelines of rocker switch connection on the user manual)
。Simple Installation: Just quick release the base, mount it on a 12mm hole, and then quick connect the base with whip light. For wiring, just plug and play the whip lights with the 2 way splitter, and then connect it to rocker switch and battery. You may need extra wire in this part. (See guidelines of rocker switch connection on the user manual)